</a>馬達控制" title="馬達控制">馬達控制" title="馬達控制">馬達控制板采用SLLIMM™ STGIPN3H60和 基于ARM® Cortex™-M3的MCU STM32F100C6T6B,最低輸入電壓275VDC或195VAC,最大輸入電壓375VDC或265VAC,輸出功率高達100W,具有過流硬件保護和基于NTC電阻的超溫保護,目標應用包括家庭熱水泵,洗碗機馬達和電冰箱壓縮機.本文介紹了STGIPN3H60主要特性,框圖,典型應用電路以及低功率馬達控制板STEVAL-IHM036V1主要特性,電路圖,材料清單和PCB元件布局圖.
This intelligent power module implements a compact, high performance AC motor drive in a simple, rugged design. It is composed of six IGBTs with freewheeling diodes and three halfbridge HVICs for gate driving, providing low electromagnetic interference (EMI) characteristics with optimized switching speed. The package is optimized for thermal performance and compactness in built-in motor applications, or other low power applications where assembly space is limited. This IPM includes an operational amplifier, completely uncommitted, and a comparator that can be used to design a fast and efficient protection circuit. SLLIMM™ is a trademark of STMicroelectronics.
STGIPN3H60主要特性:
■ IPM 3 A, 600 V, 3-phase IGBT inverter bridge including control ICs for gate driving and freewheeling diodes
■ Optimized for low electromagnetic interference
■ VCE(sat) negative temperature coefficient
■ 3.3 V, 5 V, 15 V CMOS/TTL inputs comparators with hysteresis and pull down/pull up resistors
■ Undervoltage lockout
■ Internal bootstrap diode
■ Interlocking function
■ Smart shutdown function
■ Comparator for fault protection against overtemperature and overcurrent
■ Op amp for advanced current sensing
■ Optimized pinout for easy board layout
STGIPN3H60應用:
■ 3-phase inverters for motor drives
■ Dish washers, refrigerator compressors, heating systems, air-conditioning fans, draining and recirculation pumps
圖1.STGIPN3H60方框圖
圖2.STGIPN3H60典型應用電路圖
采用SLLIMM STGIPN3H60和MCU STM32F100C6T6B低功率馬達控制板STEVAL-IHM036V1
This document describes the low power motor control board STEVAL-IHM036V1 featuring
the SLLIMM™ (small low-loss intelligent molded module) STGIPN3H60 and MCU STM32F100C6T6B. The demonstration board is an AC/DC inverter that generates a 3-phase waveform for driving 3-phase permanent magnet synchronous motors (PMSM)with field-oriented control (FOC) up to maximal 100 W without sensors. The used controller belongs to the STMicroelectronics™ ARM® Cortex™-M3 core-based medium density STM32™ MCU family.
The main device presented in this user manual is a universal, fully evaluated and populated design consisting of a 3-phase inverter bridge based on the 600 V IGBT power module in NDIP-26L package. The IGBT power module integrated all power IGBT switches with freewheeling diodes together with the high voltage gate drivers. Thanks to this integrated module, the system has been specifically designed to achieve power inverter in a reliable and compact design. Such integration saves PCB space occupation and assembly costs together with high reliability due to the design simplicity.
The board is designed to be compatible with single-phase mains for the European range of supply voltage 230 VAC (+/- 15%), or corresponding DC supply voltage. The board includes a power supply stage with VIPer™16 in buck configuration to generate +15 V supply voltage required by the application.
圖3.馬達控制板STEVAL-IHM036V1外形圖
馬達控制板STEVAL-IHM036V1主要特性:
● Minimum input voltage 275 VDC or 195 VAC
● Maximum input voltage 375 VDC or 265 VAC
● Maximum output power for applied motor up to 100 W
● Input inrush limitation based on NTC resistor
● +15 V auxiliary power supply based on a buck converter with VIPer16
● Using IGBT SLLIMM™ STGIPN3H60 in NDIP-26L molded package
● Fully populated board conception with test points
● Overcurrent hardware protection
● Overtemperature protection based on NTC resistor
● Based on STMicroelectronic’s ARM® Cortex™-M3 core-based STM32F100C6T6B microcontroller
● Possibility to modify the board with RS-485 bus
● Field-oriented control (FOC) firmware customized with “STM32 PMSM FOC SDK v3.0 Motor Control Firmware Library” (see www.st.com/internet/com/ SOFTWARE_RESOURCES/SW_COMPONENT/FIRMWARE/stm32_pmsm_foc_moto rcontrol_fwlib.zip)
● Compliance with EN55014 (CISPR 14), IEC 61000-4-5 and IEC61000-4-4
● PCB type and size:
– Material of PCB - FR-4
– Double-sided layout
– Copper thickness: ~60 μm
– Total dimensions of demonstration board: circular shape, diameter 115 mm
馬達控制板STEVAL-IHM036V1目標應用:
● Household water heating pumps
● Dishwasher pumps
● Refrigerator compressors
● High-end fans
圖4.馬達控制板STEVAL-IHM036V1電路圖(1)
圖5.馬達控制板STEVAL-IHM036V1電路圖(2)
圖6.馬達控制板STEVAL-IHM036V1電路圖(3)
圖7.馬達控制板STEVAL-IHM036V1電源框圖
馬達控制板STEVAL-IHM036V1材料清單(BOM):
圖8.馬達控制板STEVAL-IHM036V1 PCB元件布局圖(頂層)
圖9.馬達控制板STEVAL-IHM036V1 PCB元件布局圖(低層)
詳情請見:
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/DM00032611.pdf
和
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/USER_MANUAL/DM00040860.pdf
This intelligent power module implements a compact, high performance AC motor drive in a simple, rugged design. It is composed of six IGBTs with freewheeling diodes and three halfbridge HVICs for gate driving, providing low electromagnetic interference (EMI) characteristics with optimized switching speed. The package is optimized for thermal performance and compactness in built-in motor applications, or other low power applications where assembly space is limited. This IPM includes an operational amplifier, completely uncommitted, and a comparator that can be used to design a fast and efficient protection circuit. SLLIMM™ is a trademark of STMicroelectronics.
STGIPN3H60主要特性:
■ IPM 3 A, 600 V, 3-phase IGBT inverter bridge including control ICs for gate driving and freewheeling diodes
■ Optimized for low electromagnetic interference
■ VCE(sat) negative temperature coefficient
■ 3.3 V, 5 V, 15 V CMOS/TTL inputs comparators with hysteresis and pull down/pull up resistors
■ Undervoltage lockout
■ Internal bootstrap diode
■ Interlocking function
■ Smart shutdown function
■ Comparator for fault protection against overtemperature and overcurrent
■ Op amp for advanced current sensing
■ Optimized pinout for easy board layout
STGIPN3H60應用:
■ 3-phase inverters for motor drives
■ Dish washers, refrigerator compressors, heating systems, air-conditioning fans, draining and recirculation pumps
圖1.STGIPN3H60方框圖
圖2.STGIPN3H60典型應用電路圖
采用SLLIMM STGIPN3H60和MCU STM32F100C6T6B低功率馬達控制板STEVAL-IHM036V1
This document describes the low power motor control board STEVAL-IHM036V1 featuring
the SLLIMM™ (small low-loss intelligent molded module) STGIPN3H60 and MCU STM32F100C6T6B. The demonstration board is an AC/DC inverter that generates a 3-phase waveform for driving 3-phase permanent magnet synchronous motors (PMSM)with field-oriented control (FOC) up to maximal 100 W without sensors. The used controller belongs to the STMicroelectronics™ ARM® Cortex™-M3 core-based medium density STM32™ MCU family.
The main device presented in this user manual is a universal, fully evaluated and populated design consisting of a 3-phase inverter bridge based on the 600 V IGBT power module in NDIP-26L package. The IGBT power module integrated all power IGBT switches with freewheeling diodes together with the high voltage gate drivers. Thanks to this integrated module, the system has been specifically designed to achieve power inverter in a reliable and compact design. Such integration saves PCB space occupation and assembly costs together with high reliability due to the design simplicity.
The board is designed to be compatible with single-phase mains for the European range of supply voltage 230 VAC (+/- 15%), or corresponding DC supply voltage. The board includes a power supply stage with VIPer™16 in buck configuration to generate +15 V supply voltage required by the application.
圖3.馬達控制板STEVAL-IHM036V1外形圖
馬達控制板STEVAL-IHM036V1主要特性:
● Minimum input voltage 275 VDC or 195 VAC
● Maximum input voltage 375 VDC or 265 VAC
● Maximum output power for applied motor up to 100 W
● Input inrush limitation based on NTC resistor
● +15 V auxiliary power supply based on a buck converter with VIPer16
● Using IGBT SLLIMM™ STGIPN3H60 in NDIP-26L molded package
● Fully populated board conception with test points
● Overcurrent hardware protection
● Overtemperature protection based on NTC resistor
● Based on STMicroelectronic’s ARM® Cortex™-M3 core-based STM32F100C6T6B microcontroller
● Possibility to modify the board with RS-485 bus
● Field-oriented control (FOC) firmware customized with “STM32 PMSM FOC SDK v3.0 Motor Control Firmware Library” (see www.st.com/internet/com/ SOFTWARE_RESOURCES/SW_COMPONENT/FIRMWARE/stm32_pmsm_foc_moto rcontrol_fwlib.zip)
● Compliance with EN55014 (CISPR 14), IEC 61000-4-5 and IEC61000-4-4
● PCB type and size:
– Material of PCB - FR-4
– Double-sided layout
– Copper thickness: ~60 μm
– Total dimensions of demonstration board: circular shape, diameter 115 mm
馬達控制板STEVAL-IHM036V1目標應用:
● Household water heating pumps
● Dishwasher pumps
● Refrigerator compressors
● High-end fans
圖4.馬達控制板STEVAL-IHM036V1電路圖(1)
圖5.馬達控制板STEVAL-IHM036V1電路圖(2)
圖6.馬達控制板STEVAL-IHM036V1電路圖(3)
圖7.馬達控制板STEVAL-IHM036V1電源框圖
馬達控制板STEVAL-IHM036V1材料清單(BOM):
圖8.馬達控制板STEVAL-IHM036V1 PCB元件布局圖(頂層)
圖9.馬達控制板STEVAL-IHM036V1 PCB元件布局圖(低層)
詳情請見:
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/DM00032611.pdf
和
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/USER_MANUAL/DM00040860.pdf
本站內容除特別聲明的原創文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯系電話：010-82306118；郵箱：aet@chinaaet.com。