Avnet公司的DVI I/O FMC模塊提供數字視頻接口,直接連接到Xilinx® Spartan®-6或 Virtex®-6 FMC使能的基板,數字DVI視頻源為模塊提供視頻內容,而模塊提供數字DVI和DisplayPort輸出,用來顯示FPGA驅動的視頻內容.本文介紹了DVI I/O FMC模塊主要特性,框圖,DVI輸入和輸出框圖,DisplayPort輸出框圖,以及模塊電路圖和材料清單(BOM).
This FMC module provides a direct interface to digital video to Xilinx® Spartan®-6 or Virtex®-6 FMC-enabled baseboards. A digital DVI video source can provide video content to the module. The module also provides digital DVI and DisplayPort outputs to display FPGA driven video content.
The DVI I/O FMC Module is not a stand-alone module, but rather a plug-in module designed to interface with FMC compatible baseboards. In that role, the DVI I/O FMC Module provides a number of video interfaces to its host via a LPC FMC connector.
The DVI I/O FMC Module is a low pin count (LPC) FMC module containing interfaces intended for video processing. This module contains no processing intelligence and requires that it be plugged into a compatible baseboard for power, control and data processing.
DVI I/O FMC模塊主要特性:
Video Input
— DVI input interface (HDMI connector)
Video Output
— DVI output interface (HDMI connector)
— DisplayPort output interface
Clock Source
— Video clock synthesizer
I2C Configuration
— IPMI Identification EEPROM
— Peripheral configuration
Other I/O
— General-purpose I/O pins
圖1.DVI I/O FMC模塊外形圖
圖2.DVI I/O FMC模塊框圖
圖3.DVI I/O FMC模塊DVI輸入框圖
圖4.DVI I/O FMC模塊DVI輸出框圖
圖5.DVI I/O FMC模塊DisplayPort輸出框圖
圖6.DVI I/O FMC模塊電路圖(1)
圖7.DVI I/O FMC模塊電路圖(2)
圖8.DVI I/O FMC模塊電路圖(3)
圖9.DVI I/O FMC模塊電路圖(4)
圖10.DVI I/O FMC模塊電路圖(5)
圖11.DVI I/O FMC模塊電路圖(6)
DVI I/O FMC模塊材料清單(BOM):
詳情請見:
https://www.em.avnet.com/Support%20And%20Downloads/AES-FMC-DVI-G-01_HG.pdf
和
https://www.em.avnet.com/Support%20And%20Downloads/AES-FMC-DVI-G-01-SCH_041310.pdf